As successor of the renowned CPU boards from the M4 series, Janich
& Klass has developed the industrial high-performance processor
card ISA96 A2/103. The core of this 3U/8HP board is the CPU Module A2
with firmly soldered processor, DDR3 main memory, and processor power
The CPU Module bases on Intel's Ultra-Mobile Platform "Pineview" with
the "Atom" processors N455, D425, and D525, and also the I/O-Controller
"ICH8". The processors are available in different clock rates, with
1.6GHz or 1.8GHz. The firmly soldered DDR3 main memory is
equipped with 1GByte, or 2GByte. On demand, the main memory size can be
doubled, by adding an SODIMM module.
For many industrial CPU boards an extreme low heat production
important than a very high clock rate. Only this way, fanless or even
hermetically encapsulated systems can be realised.
The newly developed ISA96 V8/103 was specifically designed for
such conditions. It allows to operate 500MHz class systems with less
than 5W of power
consumption, without leaving the narrow price frame of Low-Cost
with its ultra-low-power 4th generation of Intel's Core i-processors
„Haswell“) continues Janich&Klass CPU
boards made for ISA96- and AT96-Bus.
Staying mostly compatible with Janich&Klass predecessor boards
D2/103, A2/103 and M4/103, the H1/103 furthermore offers awesome
performance and modern high speed interfaces.
Still with the base version of
there will be 2 Gigabit Ethernet Controller
and 2 USB3.0 interfaces included. The outdated VGA port is replaced by
DisplayPort connector, where easy adapting to HDMI, DVI and
even VGA is
possible, if needed. For storage devices there is still a CompactFlash
and an optional mounted 2.5” drive holder and as an
improvement the option to
use so called SATADOM modules.